Skip to Content
-
- home Home
- content_paste
- contact_mail
- account_tree
BIAST
Used with In-Line Amplifiers like the UFM series, or powered antennas like the ALP650 or ALP690. It provides DC phantom power on the coaxial line.
Product Code:
BIAST
◼ The BIAST is used to apply DC power to a coaxial antenna line for remotely powering the UFM230 filter/amp. The DC power applied to the BIAST (9 to 16 VDC) appears on the input port of the BIAST to power the UFM230 through the coaxial cable, but is isolated from the output port so it will not be applied to the input of the receiver.
◼ The BIAST is normally placed near the receiver being fed by the coaxial cable, where power is available. The UFM230 filter/amp and antenna are placed at the opposite end of the coaxial cable, close to the antenna.
◼ Power supply (not included with BIAST): 110V AC input 12V DC regulated output required for powering the BIAST (CH20, DCR12/A8U and DCR12/A4U will work.)
◼Review the BIAST data sheet here
| Compatibility | UCR411a 路 R400a 路 ALP650 路 ALP690 路 UCR211 路 UCR411 |
|---|
Copyright © 2022 Lectrosonics, Inc. All rights reserved.